RCM - RETRO COMPUTER MUSEUM

GENERAL => ARCADE => Topic started by: jimbob005 on May 09, 2012, 02:39:02 PM

Title: My new bartop
Post by: jimbob005 on May 09, 2012, 02:39:02 PM
hi all making a new bartop just started but rain has stoped play

(http://i154.photobucket.com/albums/s267/jimbob005/2609e570.jpg)

i did the marking out 2 days ago lets hope it works

(http://i154.photobucket.com/albums/s267/jimbob005/fd1826a4.jpg)

one side cut out

(http://i154.photobucket.com/albums/s267/jimbob005/b4f7078e.jpg)


now 2 sides cut out not looking to bad

james
Title: Re: My new bartop
Post by: AndyRCM on May 09, 2012, 02:41:14 PM
nice one jim . . . :)
Title: Re: My new bartop
Post by: muguk on May 09, 2012, 03:45:21 PM
Looking good Jim.

How much is it to make one of these (inc. all the buttons and gadgetry) so that all you need to do is supply the PC inside of it?

Title: Re: My new bartop
Post by: jimbob005 on May 09, 2012, 03:57:04 PM
Mike your looking on around 150 ish
Title: Re: My new bartop
Post by: stiggy2009 on May 09, 2012, 05:07:55 PM
Looking good Jim. Are you sure you've got enough depth for the buttons as the space under where I presume you're going to plonk the CP looks a bit shallow...or are you using short Sanwa style buttons?

Title: Re: My new bartop
Post by: billdooruk on May 09, 2012, 08:17:20 PM
Mike your looking on around 150 ish

Just to confirm...that would be for all controls, buttons cabinet - just need to add PC & screen???
Title: Re: My new bartop
Post by: muguk on May 09, 2012, 08:24:38 PM
Cheers Jim.  Always handy to have an estimate of what to aim for.
Title: Re: My new bartop
Post by: jimbob005 on October 13, 2012, 07:17:50 PM
just an update on this bartop this one will not be finished due to me new one

james
Title: Re: My new bartop
Post by: levs on October 13, 2012, 08:10:56 PM
What new is that jim? Slim one for the front room? I've started the mini one, its looking small! ;)
Title: Re: My new bartop
Post by: jimbob005 on October 13, 2012, 08:56:03 PM
nice one levs it is a slim one full hight i will start a new topic this week