Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Topics - g4ugm

Pages: [1]
1
FOR SALE / WANTED / Dot Matrix Printers - Free for collection
« on: November 18, 2019, 12:57:02 PM »
Panasonic wide carriage quiet printer
Amstrad DMP200

https://1drv.ms/u/s!Ag4BJfE5B3onlfEF5kutlWAvQx2GkQ?e=DfzBuk


2
FOR SALE / WANTED / Free - Compaq iPaqs
« on: April 10, 2016, 08:16:02 PM »
Got a few iPAQ H36xx and accessories such as sleeves, cradles, keyboards, which I no longer need. Any Interest? They probably need new batteries

3
GENERAL RETRO CHIT CHAT / VCF - East
« on: April 20, 2015, 10:30:48 PM »
A few pictures here of InfoAge and VCF-East 11

http://1drv.ms/1zuJCae

4
FOR SALE / WANTED / IBM PC and XT Manuals
« on: August 10, 2014, 03:48:42 PM »
Folks,

 I have the usual set of IBM XT manuals, so Basic (6361134,6361724,6361129), DOS(6183940), Guide to Operations Personal Computer XT (6391316), Guide to Operations (6183474) plus a diagnostics disk (1502212) located in Manchester UK. The cardboard sleeves are "sad" but the binders and manuals are "used". Open to offers

5
I am bringing along my SBC6120 (PDP-8 on a board)

http://www.meetup.com/Manchester-Vintage-and-Retro-Computing/events/197356742/

All Welcome

6
FOR SALE / WANTED / steering wheel and pedals for N64
« on: July 06, 2014, 06:07:22 PM »
Open to offers?

7
FOR SALE / WANTED / old 17" CRT Monitors - Free to good home or suggestions
« on: February 08, 2014, 08:38:37 AM »
I have a couple of 17" VGA monitors. Does any one keep these or have you all skipped them....

8
FOR SALE / WANTED / 8-bit ISA Display and HDD cards in the UK
« on: December 01, 2013, 07:35:24 PM »
I recently picked up the following cards at a Radio Rally and I don't really need them, but thought they might be useful to someone.

    1 x Oak VGA card. No Manual (but I think I have a table of switch settings somewhere as I used to own one as well)

    1 x Emulex Persyst IBM CGA Compatible Card with Printer Port. No Composite out but has header on card. Boxed and with manual.

    1 x Western Digital WD1002S-WX2 "Winchester" Controller Card. The Manual for this is here:-


http://bitsavers.informatik.uni-stut...nual_Jul85.pdf

All Items truly untested, "sold as seen" as I don't have any real XT's or an MFM hard disk to test with.


10
Folks,

 We have a "meeting" arranged for this Friday 11th October @19:00 in the Manchester MadLab (http://madlab.org.uk/). All welcome. I will bring allong my Nexys Spartan 3E FPGA board and demonstrate running the IBM 1130 Emulator.

 Dave.

11
FOR SALE / WANTED / Creative Blaster Keys free to good home
« on: January 04, 2013, 09:59:17 PM »
Dates from 1995

Needs combined midi/joystick port...


12
The 50th Norbreck Amateur Radio, Electronics and Computing Exhibition will be held at the Norbreck Castle Hotel Exhibition Centre on Queens Promenade, North Shore, Blackpool, FY2 9AA. Doors will open at 10.30 and 10:15 for those with disabilities. Admission will be £5 (under 14s free).

http://www.narsa.org.uk/

As NARSA is an association of clubs any Computer Club is welcome to affiliate @ £15 for which they get two tables at the exhibition, three exhibitors tickets and a share in any profits. A few trade tables still available, see

http://www.narsa.org.uk/blackpool-rally/trade-bookings/

for details. (note if you get in quick you can still be squeezed into the stand list)

It is mainly a radio show but there is always lots of computer gear on sale, much of it Vintage. Last year there were MAC Classics and BBC "B"s for sale.

13
FOR SALE / WANTED / 4116 ram chips plus eproms
« on: February 13, 2012, 12:05:50 AM »
got about 100 4116 ram chips in case any one wants for retro project. Also some 32k eproms

14
NEW MEMBERS - SIGN IN HERE PLEASE / Dave G4UGM
« on: June 12, 2011, 12:31:43 PM »
Hi Folks,

Well I am interested in all aspects of retro computing. I own an Atari STE, and Atari TT. I use emulation for access to old IBM Mainframe software. I am a voulenteer at the Museum of Science and Industry in Manchester working on the Hartree Differential Analyzer, a mechanical analogue computer. I have built a small electronic analogue computer because I can't find a vintage one at a price I can afford.

Dave.

Pages: [1]