Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - andy_rea

Pages: [1] 2 3
1
Andy Rea,

9th, 10th, 16th, 17th

Regards Andy

2
Add me to the list of attendees :-D looking forward to it.

Regards Andy

3
Yaay I've checked the calender and verified the finances I'm busy and broke but.....

still wanna come play, I'm assuming there is still room left if i make a suitable donation via the virgin money giving page ?

Regards Andy

4
i was just thinking i might drop by and give some support for those eager and willing to do the full shift...

Andy

5
HARDWARE/SYSTEMS DISCUSSION / Re: ZX80 on ebay, strange mod ?
« on: May 13, 2014, 04:43:16 PM »
I'm with Moggy on that, certainly looking at were those wires are connected around the video sync circuitry.

Andy

6
OFF TOPIC / Re: Everdrive (console flashcart) group buy 2014
« on: February 03, 2014, 10:51:58 AM »
Where do i send my money  ;D

Andy

7
OFF TOPIC / Re: Everdrive (console flashcart) group buy 2014
« on: January 19, 2014, 11:22:19 PM »
Would apprciate been put on the list  for an Everdrive MD

Regards Andy

8
ARCADE / Re: Ms. Pac-Man Bootleg Repair Log
« on: January 19, 2014, 10:35:11 AM »
Nice Job, I really enjoy reading these repair Logs...

Thnaks for sharing

9
Ah thanks Muguk, i obviously wasn't looking hard enough ( or probably just too lazy )

Anyway, Cool invitro / demo / thingy if a little short.

10
Does not seem to work on ZX81, i even tried it on my souped up 20Mhz machine... Pah.

Oh hums, but seriously somebody will have to do a video or something, i haven't got a machine with good enough graphics :-(

11
That was an interesting read,

Thanks Andy

12
OMG that is a seriously impressive shed !

13
RCM ANNOUNCEMENTS / Re: Non Active Members
« on: May 03, 2013, 08:13:04 PM »
Phew... good job i log in now and again ! I'm a bit of a lurker  ;D

Andy

14
ARCADE / Re: Best way to debug a stuck bus line?!
« on: February 04, 2013, 05:29:01 PM »
Bit late now, since as you found that pesky short  ;D  However perhaps something like this http://dangerousprototypes.com/2012/06/25/half-ohm-mohm-addapter-for-multimeters/

Would be useful for future shorts, able to measure down to 1 Milli-ohm, as your probes get closer to the short the resistance will drop.

Just a thought, BTW i do enjoy reading you repair logs, keep posting em  8)

Regards Andy

15
OFF TOPIC / Re: Freaked out...
« on: January 31, 2013, 09:17:04 PM »
Neigbour ?

is rather strange, set up a motion sensitive camera  ;D

Pages: [1] 2 3