Topic: Can anyone help RGB mod a PC Engine?  (Read 2979 times)

Author Message

0 Members and 1 Guest are viewing this topic.

Offline flibblesan

  • ZX80
  • *
  • Posts: 27
  • Kudos 3
    • View Profile
Can anyone help RGB mod a PC Engine?
« on: September 11, 2014, 12:49:36 AM »
I thought it would be so easy.. nope. Turns out my soldering skills are a LOT worse than I initially thought and I'm worried I'll cause some damage if I even try to do this.

Basically I need the unit modifying for RGB output via a 9pin DIN socket (Sega Megadrive2 style). The old RF block needs desoldering, wires attached to the ext bus pins to tap the RGB bits and bobs then all soldered up to the socket.

Anyone able to help with this please? I've looked around for anyone doing it on other forums and websites but either they don't get back to me or they just want to install a cable coming out of the side which is not what I want at all.

I have all the components so really just need a solderer. Anyone up for the task? Thank you :D

(slightly upset that I've spent money on getting all the bits, soldering kit etc and I'm a complete and utter idiot)

Offline AndyRCM

  • >=))))º> GO FEED THE FISH! <º((((=<
  • Administrator
  • Amiga 4000
  • ******
  • Posts: 9632
  • Kudos 50
  • Gender: Male
  • Manic Jet Set Willy
    • View Profile
    • Retro Computer Museum
Re: Can anyone help RGB mod a PC Engine?
« Reply #1 on: September 11, 2014, 09:05:01 AM »
Hello mate,
I am sure one of us here at the museum can do it for you . . . if you are hoping to visit sometime . . . bring it with you and we will see what we can do.
Cheers

Andy
"I could see the faces of those who led pissing themselves laughing" - Funeral Pyre by The Jam

Offline flibblesan

  • ZX80
  • *
  • Posts: 27
  • Kudos 3
    • View Profile
Re: Can anyone help RGB mod a PC Engine?
« Reply #2 on: September 11, 2014, 11:26:28 AM »
Thanks Andy. Will be going to the next event in Leicester on the 21st :)

Offline flibblesan

  • ZX80
  • *
  • Posts: 27
  • Kudos 3
    • View Profile
Re: Can anyone help RGB mod a PC Engine?
« Reply #3 on: September 11, 2014, 01:24:32 PM »
Found some instructions for taking composite from the expansion connector on the back. Made a quick cable up only to find that the machine isn't outputting anything. Knowing my luck I've bought a broken unit even though it was sold as working :/

update: I'm the muppet who didn't realise the PCE needs center NEGATIVE power.. doh. Now it works. Got sound from the back :D
« Last Edit: September 11, 2014, 02:16:19 PM by flibblesan »

Offline AndyRCM

  • >=))))º> GO FEED THE FISH! <º((((=<
  • Administrator
  • Amiga 4000
  • ******
  • Posts: 9632
  • Kudos 50
  • Gender: Male
  • Manic Jet Set Willy
    • View Profile
    • Retro Computer Museum
Re: Can anyone help RGB mod a PC Engine?
« Reply #4 on: September 11, 2014, 05:22:58 PM »
Yeah they do . . . still need assistance with it? Or will you be okay now? :)

A
"I could see the faces of those who led pissing themselves laughing" - Funeral Pyre by The Jam

Offline flibblesan

  • ZX80
  • *
  • Posts: 27
  • Kudos 3
    • View Profile
Re: Can anyone help RGB mod a PC Engine?
« Reply #5 on: September 11, 2014, 06:17:40 PM »
Yeah they do . . . still need assistance with it? Or will you be okay now? :)

A

Yes please. Do the museum PC Engines have mods already?

Offline AndyRCM

  • >=))))º> GO FEED THE FISH! <º((((=<
  • Administrator
  • Amiga 4000
  • ******
  • Posts: 9632
  • Kudos 50
  • Gender: Male
  • Manic Jet Set Willy
    • View Profile
    • Retro Computer Museum
Re: Can anyone help RGB mod a PC Engine?
« Reply #6 on: September 11, 2014, 06:20:05 PM »
Only one of ours is modded. :)
"I could see the faces of those who led pissing themselves laughing" - Funeral Pyre by The Jam

Offline flibblesan

  • ZX80
  • *
  • Posts: 27
  • Kudos 3
    • View Profile
Re: Can anyone help RGB mod a PC Engine?
« Reply #7 on: September 11, 2014, 06:26:10 PM »
Only one of ours is modded. :)

I'll have to take a look at that then :D
Been meaning to pop down for a while but it's just having the time. Need to make it more regular.

Could had just bought a Core Grafx with AV built-in but there is just something nicer about the original machine and it'll look nice all cleaned up. Next thing to pick up is a CDROM2 unit. Probably one sold as "non-working" as 9 times out of 10 it's just a worn middle gear. I have a spare gear being sent to me :D

I do need to sort my blooming soldering iron out. Only had it a week and it just doesn't seem to get that hot :/

Offline flibblesan

  • ZX80
  • *
  • Posts: 27
  • Kudos 3
    • View Profile
Re: Can anyone help RGB mod a PC Engine?
« Reply #8 on: September 11, 2014, 06:50:11 PM »
Reminds me.. I have a bag of bits to bring down with me that you may find a home for.

Offline flibblesan

  • ZX80
  • *
  • Posts: 27
  • Kudos 3
    • View Profile
Re: Can anyone help RGB mod a PC Engine?
« Reply #9 on: September 12, 2014, 08:20:23 PM »
Change of plan. I've got one of these cables on order which I'll be using until I obtain a CDROM unit in the future. Then I'll recycle the cable into an internal mod :D http://www.amibay.com/showthread.php?62536-PCEngine-external-RGB-SCART-No-internal-modification-required-Order-thread

Still going to pop down to the museum for a nosey though :D